Publications

 

Selected  Journal Publications

 

Eleazar Gil-Herrera, Athanasios Tsalatsanis, Ali Yalcin and Autar Kaw, “Predicting Academic Performance Using a Rough Set Theory Based Knowledge Discovery Methodology”, International Journal of Eng. Edu., accepted.

 

Alcides R Santander-Mercado, Jose Zayas-Castro, Laila Cure and Ali Yalcin, “Evaluating the Impact of Patient Arrival Patterns in the Performance of Appointment Scheduling Rules”,  International Journal of Applied Management Science. December, 2011, to appear.

 

Autar K. Kaw and Ali Yalcin, “Introducing and Assessing Laboratory Experience in a Numerical Methods Course for Engineers”,  ASEE Computers in Education Journal Vol. XVIIII (3), July-September 2009, pp. 57-65.

 

A. Kaw, A. Yalcin, "A Metric to Quantify the Topsy-Turvyness of a College Football Season", Chance (An American Statistical Association Magazine), pp. 18-26, Vol. 22(3), 2009.

 

Autar K  Kaw and Ali Yalcin,  “Problem-Centered Approach in a Numerical Methods Course”, Journal of Professional Issues in Engineering Education & Practice, 134(4), 2008, p, 359-364

 

Athanasios Tsalatsanis, Kimon Valavanis, Ali Yalcin, “Vision Based Target Tracking and Collision Avoidance for Mobile Robots”, Journal of Intelligent Robotics,  48(2), 2007, p. 285-304

 

Chaitanya Damle and Ali Yalcin, “Flood Prediction Using Time Series Data Mining”, Journal of Hydrology, v. 333, 2007, p.305-316

 

Pranav. J. Deshpande, Ali Yalcin, Jose Zayas-Castro, Luis E. Herrera , "Simulating Less-Than-Truckload Terminal Operations", International Journal of Benchmarking, 14(1), 2007

 

Ali Yalcin,  Atul Khemuka, Pranav Deshpande,  "Modeling and Control of Workflow Managements Systems based on Discrete Event Systems Theory",  International Journal of Production Research, 43(20), 2005, pp. 4359-4379

 

A. Yalcin and Ravi Namballa “Object Oriented Simulation of Manufacturing Systems” Computer and Industrial Engineering, 48(1), 2005, p. 111-127.

 

A. Yalcin and Thomas O. Boucher, “A Continuous Time Solution to Disaggregation of Hierarchical Production Plans”, IIE Transactions, v. 36 n. 11, 2004, pp. 1023 - 1035

 

William Miller, Ali Yalcin and Gulgun Alpan “Editorial for the RCM special issue for FAIM 2003”, Robotics and Computer Integrated Manufacturing, v.20 n.6, 2004, pp. 471-472

 

S. Mohan, A. Yalcin, and S. Khator, “Deadlock Avoidance in Automated Flexible Manufacturing Cells”, Robotics and Computer Integrated Manufacturing, v.20 n.6, 2004, pp. 541-551

 

A. Yalcin “Supervisory Control of Automated Manufacturing Cells with Resource Failures” Robotics and Computer Integrated Manufacturing, v 20, n 2, 2004, p.111-121

 

A. Yalcin “Deadlock Avoidance in Automated Flexible Manufacturing Cells Using Partial Deadlock Detection”, Int. Journal of Operations and Quantitative Management, v 9, n 1, 2003, p. 21-33

 

A. Yalcin and T.O. Boucher “Deadlock Avoidance in Flexible Manufacturing Systems Using Finite Automata”. IEEE Transactions on Robotics and Automation, v 16, n 4, 2000, p. 424-429

 

T.O. Boucher, A. Yalcin and Tsuta Tai “Dynamic Routing and the Performance of Automated Manufacturing Cells”, IIE Transactions, v 32, n 10, 2000, p. 975-988

 

A. Yalcin and T.O. Boucher “An Architecture for Flexible Manufacturing Cells with Alternate Machining and Alternate Sequencing”. IEEE Transactions on Robotics and Automation, v 15 n 6, 1999, p. 1126-1130

 

 

Books and Book Chapters

 

T.O Boucher  and Ali Yalcin “Design of Industrial Information Systems” , Elsevier, 2006

 

A. Yalcin, Tsuta Tai, and T.O Boucher “Deadlock Avoidance in Automated Manufacturing Systems Using Finite Automata and State Space Search”, IEEE Press, 2005