Journal Articles
-
R. Clark, A. Kaw, M. Besterfield-Sacre, "Comparing the
Effectiveness of Blended, Semi-Flipped, and Flipped
Formats in an Engineering Numerical Methods Course",
ASEE Advances in Engineering Education, pp. 1-38, Vol.
5, 2016.
-
G. AdenBuie, A. Kaw, A. Yalcin, "Comparison
of final examination formats in a numerical methods course",
International Journal of Engineering Education,
pp. 72-82, Vol. 31, 2015.
-
S.H. Garapati, A.Kaw, "Analysis of Heating and Cooling Methods
for Assembly of Steel Fulcra in Bascule Bridges", Bridge
Structures, pp. 121-133, Vol. 8, 2012.
-
A. Kaw, A. Yalcin, D. Nguyen, R.
Pendyala, M. Hess, G. Lee-Thomas, G. Besterfield, J. Eison, C.
Owens, “A Holistic View on History, Development, Assessment, and
Future of an Open Courseware in Numerical Methods”, ASEE
Computers in Education Journal, Vol 3(4), pp. 57-71, 2012.
-
C. Owens, A. Kaw, M. Hess,
"Assessing Online Resources for an Engineering Course", Computer
Applications in Engineering Education, pp. 426-433, Vol. 20(3),
2012.
-
A. Kaw, A. Yalcin, "Measuring
Student Learning Using Initial and Final Concept Test in a STEM
Course", International Journal of Mathematical Education
in Science and Technology, pp. 435-448, Vol 43(4), 2012.
-
A. Yalcin, A. Kaw, "Does
Grading Homework Improve Student Examination Performance?",
International Journal of Engineering
Education, pp. 1333-1342, Vol 27(6), 2011.
-
S. Garapati, L. Snyder, A. Kaw, "Comparing Two Procedures for
Assembling Steel Fulcra in Simple-Trunnion Bascule Bridges", Bridge
Structures, pp. 19-30, Vol 7(1), 2011.
-
S. Garapati, A. Kaw, "Effect of Geometry, Loading and Elastic
Moduli on Critical Parameters in a Nanoindentation Test in Polymeric Matrix
Composites with a Nonhomogeneous Interphase", Composite Interfaces,
pp. 275–294, Vol. 18, 2011.
-
A. Kaw, S. Garapati, "Development
and Assessment of Digital Audiovisual YouTube Lectures for an
Engineering Course In Numerical Methods", ASEE Computers in
Education Journal, pp. 89-97, Vol. 2 (2), 2011.
-
E. Gil-Herrrera, A. Tsalatsanis,
A.
Yalcin, A. Kaw, "Predicting Academic Performance Using a Rough
Set Theory Based Knowledge Discovery Methodology",
International Journal of
Engineering Education, pp. 992-1002, Vol. 27 (5), 2011.
-
M. Rajapakshe, M. Gunaratne, A.
Kaw, "Evaluation of LuGre Tire Friction Model with Measured Data
on Multiple Pavement Surfaces," Tire Science and Technology,
TSTCA, Vol. 38, No. 3, pp. 213-227, 2010.
-
A. Kaw, A. Yalcin, "A Metric to
Quantify the Topsy-Turvyness of a College Football Season",
Chance (An American Statistical Association Magazine), pp.
18-26, Vol. 22(3), 2009. (More
info)
-
A. Kaw, A. Yalcin, B. DeMenezes,
E. Allard, "Introducing and Assessing Laboratory Experience in a
Numerical Methods Course for Engineers",
ASEE
Computers in Education Journal, pp. 57-65, Vol. XVIIII (3),
2009.
-
A.K. Kaw, A.Yalcin,
"Problem-Centered Approach in a Course in Numerical Methods",
ASCE Journal of Professional Issues and Engineering Education,
pp. 359-364, Vol. 134(4), 2008.
-
C. Nguyen, A.K. Kaw, J. Paul,
"Sensitivity Analysis of Cooling Methods and Geometric
Parameters in Assembly Procedure of Bascule Bridge Fulcrums",
The Journal of Strain Analysis for Engineering Design, pp.
337-349, Vol. 42, (2007).
-
P. Chalasani, A.K. Kaw, J. Daly,
C. Nguyen "Effect of Geometrical and Material Parameters in
Nanoindentation of Layered Materials with an Interphase",
International Journal of Solids and Structures, pp.
5380-5395, Vol. 44 (16), (2007).
-
A.K. Kaw, M. Hess, "Comparing
Effectiveness of Instructional Delivery Modalities in an
Engineering Course", International Journal of Engineering
Education, pp. 508-516, Vol. 23(3), (2007).
-
A.K. Kaw and S. Ho, "Introducing
Approximate Methods in Theory of Elasticity", Computer
Applications for Engineering Education, pp. 120-134, Vol. 14
(2), (2006).
-
N. Collier, A.K. Kaw, G.H.
Besterfield, M. Rahman, "Benefits of Staged Cooling of Composite
Cylinders in Shrink Fitting", The Journal of Strain Analysis
for Engineering Design, pp. 349-361, Vol. 41 (5), (2006).
-
A.K. Kaw, G.H. Besterfield, J.
Eison, "Effectiveness of a Holistic & Customized Approach to
Teaching Numerical Methods", International Journal of
Engineering Education, pp. 712-722, Vol. 21 (4), 2005.
-
A.K. Kaw,
"Techniques Employed by Highly Effective Engineering Educators",
ASCE Journal of Professional Issues and Engineering Education,
pp. 175-177, Vol. 131 (3), (2005).
-
A.K. Kaw, G.H.
Besterfield and S. Nichani, "Integrating a Research Problem in a
Course in Applied Elasticity", International Journal of
Mechanical Engineering Education, pp. 232-242, Vol. 32 (3),
(2004).
-
N. Collier,
A.K. Kaw, "On Comparing Computational Systems � Maple, Mathcad,
Matlab, and Mathematica", ASEE Computers in Education Journal,
pp. 12-24, Vol. XIV (1), (2004).
-
A.K. Kaw, N.
Collier, M. Keteltas, J. Paul, G.H. Besterfield, "Holistic but
customized resources for a course in numerical methods", Computer Applications for Engineering Education, pp.
203-210, Vol. 11, (2003).
-
G.H. Besterfield, A.K. Kaw, S.
Nichani, B. Ratnam, T. Cherukara, M. Denninger "Assembly
Procedures of a Trunnion-Hub-Girder for Bascule Bridges",
Theoretical and Applied Fracture Mechanics, Vol 40, No 2,
pp. 123-134, (2003).
-
G.H. Besterfield, S. Nichani, A.K.
Kaw, T. Eason, "Full-Scale Testing of Trunnion-Hub-Girder
Assemblies for Bascule Bridges", ASCE Journal of Bridge
Engineering, Vol. 8, No 4., pp. (2003).
-
N. Pai, A.K. Kaw and M. Weng,
"Optimization of Laminate Stacking Sequence for Failure Load
Maximization Using Tabu Search", Composites Part B , Vol.
34, No. 1, pp 405-413, (2003).
-
J. Ye and A.K. Kaw, "Determination
of Mechanical Properties of Fiber-Matrix Interface from Pushout
Test", Theoretical and Applied Fracture Mechanics, Vol.
32, No 1, pp 15-25, (1999).
-
A.K. Kaw and R. Rodriguez,
"Synthesis of Tools in Teaching a Course in Mechanics of
Composite Materials", Mechanics, Vol. 27, No. 11, pp.
5-12, (1998).
-
A.K. Kaw and G. Willenbring, "A
Software Tool for Mechanics of Composite Materials", International Journal of Engineering Education, Vol. 13, No.
6, pp. 433-481, (1998).
-
T. Srinath, H. Madanraj, A.K. Kaw,
J. Ye and G.H. Besterfield, "Effect of Extrinsic and Intrinsic
Factors in Indentation Tests," International Journal of
Solids and Structures, Vol. 33, No. 24, pp. 3497-3516
(1996).
-
A.K. Kaw and M. Daniels, "Should
We Continue to Debate over the Change to SI System?," ASCE
Journal of Professional Issues in Engineering Education and
Practice, Vol. 122, No. 2, pp. 69-72 (1996).
-
N.J. Pagano and A.K. Kaw,
"Asymptotic Stresses Around a Crack Tip at the Interface Between
Planar or Cylindrical Bodies," International Journal of
Fracture, Vol. 71, No. 2, pp. 151-164, (1995).
-
A.K. Kaw, S. Kunchithpatham, N.J.
Pagano, "Stress Field in a Composite Cylinder with a Friction
Fiber-Matrix Interface," International Journal of Solids and
Structures, Vol. 32, No. 15, pp. 2127-2154, (1995).
-
V.T. Bechel and A.K. Kaw,
"Fracture Mechanics of Composites with Nonhomogeneous
Interphases and Nondilute Fiber Volume Fractions," International Journal of Solids and Structures, Vol. 31, No.
15, pp. 2053-2070, (1994).
-
A.K. Kaw and J. Ye, "Comparison of
Fracture Mechanics Models with Axisymmetric and Planar
Assumptions," Composites Engineering Journal, Vol. 4, No.
6, pp. 621-636, (1994).
-
A.K. Kaw and D. Jadhav,
"Axisymmetric Elastic Response of a Composite Cylinder with a
Broken Fiber", Theoretical and Applied Fracture Mechanics,
Vol. 21, pp. 197-206, (1994).
-
V. Bechel and A.K. Kaw, "On Using
a Symbolic Manipulator in Teaching Classical Elasticity,"
ASEE Computers in Education Journal, Vol. 4, No. 2, pp.
55-59, (1994).
-
A.K. Kaw and N.J. Pagano,
"Axisymmetric Thermoelastic Response of a Composite Cylinder
Containing an Annular Crack", Journal of Composite Materials,
Vol. 23, No. 6, pp. 540-571, (1993).
-
A.K. Kaw and K.S. Gadi, "Mechanics
of Fiber-Reinforced Composites with Doubly Periodic Cracks,"
Theoretical and Applied Fracture Mechanics, Vol. 19, No. 3,
pp. 173-182, (1993).
-
A.K. Kaw, D. Jadhav, G. Sudhakar,
"On Solving Crack Problems in Fiber Reinforced Composites by
Symbolic Manipulations," Advances in Engineering Software and
Workstations, Vol. 16, No. 1, pp. 31-36, (1993).
-
A.K. Kaw and G.H. Besterfield,
"Periodic Matrix Cracking in Brittle Matrix Composites,"
International Journal of Solids and Structures, Vol. 29, No.
10, pp. 1193-1207, (1992).
-
A.K. Kaw, A. Selvarathinam and G.H.
Besterfield, "Comparison of Interphase Models for a Crack in
Fiber Reinforced Composites," Theoretical and Applied
Fracture Mechanics, Vol. 17, pp. 133-147, (1992).
-
A.K. Kaw, "Numerical Solutions of
Strong Integrals in Hadamard's Sense," IMSL Directions,
Vol. 9, No. 1, pp. 8-9, (1992).
-
A.K. Kaw, "An Instructional
Interactive Aid for Mechanics of Composites," International
Journal of Mechanical Engineering Education, Vol. 20, No. 3,
pp. 213-229 (1992).
-
A.K. Kaw and G.H. Besterfield,
"Effect of Interphases on Mechanical Behavior of Composites,"
ASCE Journal of Engineering Mechanics, Vol. 117, No. 11, pp.
2641-2658, (1991).
-
A.K. Kaw and V.G. Das, "A Crack in
an Imperfect Interface in Composites," Mechanics of Materials,
Vol. 11, pp. 295-322, (1991).
-
A.K. Kaw and J.G. Goree, "The
Semi-Infinite Strip Problem in Mechanics of Composites," ASTM
Journal of Composite Technology and Research, Vol. 13, No.
2, pp. 65-77, (1991).
-
A.K. Kaw, "Cauchy Singular
Integral Equations with Logarithmic Singular Integrands in Solid
Mechanics," Mechanics Research Communications, Vol. 18,
No.5, pp. 261-268, (1991).
-
A.K. Kaw, "On Evaluating Integrals
with Strongly Singular Integrands," Advances in Engineering
Software and Workstations, Vol. 13, No. 2, pp. 84-103,
(1991).
-
A.K. Kaw and J.G. Goree, "The
Effect of Interleaves on Fracture of Laminated Composites: Part
I - Analysis," ASME Journal of Applied Mechanics, Vol.
57, No. 1, pp. 168-174, (1990).
-
A.K. Kaw and J.G. Goree, "The
Effect of Interleaves on Fracture of Laminated Composites: Part
II - Solution and Results," ASME Journal of Applied Mechanics,
Vol. 57, No. 1, pp. 175-181, (1990
-
A.K. Kaw, "Some Simple Tools to
Develop Educational Software," The Quickbasic Journal,
Vol. 1, No. 3, pp. 23-29, (1990).
-
A.K. Kaw and J.G. Goree, "Analysis
of Notched Laminates with Interlaminar Debonding," Journal of
Engineering Fracture Mechanics, Vol. 22, No. 6, pp.
1013-1029, (1985).
|
|